This active damping system offers continuous adjustment of individual damping forces based on current road conditions and driving style.

The driver can choose from two setup modes, ‘Normal’ and ‘Sport’, using a separate ‘damper’ button on the center console. ‘Normal’ mode is designed for general road driving and circuits with uneven tarmac. ‘Sport’ mode is intended for smoother track surfaces, where the harder settings help eliminate pitch and roll.

In either mode, PASM continuously evaluates the current conditions while automatically selecting the corresponding damper rates from the respective set of mapped values.

A range of sensors are used to monitor the movement of the body under acceleration, braking and cornering maneuvers, as well as on poor road surfaces. The PASM control unit then evaluates this data and modifies the damping force on each individual wheel in accordance with the selected mode. The result is a significant reduction in body movement as well as a better grip on the road.

For example: if ‘Sport’ mode is selected, the suspension is automatically set to a harder damper rating. If the quality of the track surface falls below a certain threshold, the system immediately changes to a softer rating within the ‘Sport’ setup range. When the quality of the tarmac improves once more, PASM automatically returns to the original, harder rating.

Need more information about PASM? Click this link: FAQ for PASM

This optional package is a valuable addition for trackday use. Available in conjunction with the CDR-24 CD radio, it includes a swivel-mounted analog and digital timer unit which is centrally located on the dashboard. All functions are easily accessible via the control stalk for the on-board computer. Analog dials measure hours, minutes and seconds, while a separate digital field displays whole seconds, tenths and one hundredths of a second. A second digital display runs in parallel in the instrument cluster. Click this Link to visit the FAQ entry for Sport Chrono.

A limited slip differential (LSD) is a modified or derived type of differential gear arrangement that allows for some difference in rotational velocity of the output shafts, but does not allow the difference in speed to increase beyond a preset amount. In an automobile, such limited slip differentials are sometimes used in place of a standard differential, where they convey certain dynamic advantages, at the expense of greater complexity.

The main advantage of a limited slip differential is found by considering the case of a standard (or "open") differential where one wheel has no contact with the ground at all. In such a case, the contacting wheel will remain stationary, and the non-contacting wheel will rotate freely– the torque transmitted will be equal at both wheels, but will not exceed the threshold of torque needed to move the vehicle, thus the vehicle will remain stationary. In everyday use on typical roads, such a situation is very unlikely, and so a normal differential suffices. For more demanding use however, such as driving off-road, or for high performance vehicles, such a state of affairs is undesirable, and the LSD can be employed to deal with it. By limiting the velocity difference between a pair of driven wheels, useful torque can be transmitted as long as there is some friction available on at least one of the wheels.



To see the installation of a LSD style unit Click Here -> Article Forthcoming Stay Tuned

The Porsche Club of America - http://www.pca.org
CaymanClub.Net members who are also PCA members should request access to the PCA Member only forum by filling in their PCA Member ID# into their profile and then requesting a group membership addition, both of which can be done in the User Control Panel (User CP)