Quote:
Originally Posted by Skidmarc
My battery recently died (key in ignition and front hood unlatched). When the battery was recharged, I followed the instructions to reset the "Storing end position of the window" (page 27 of the Owner's Manual). Cannot get it to work. I'm not sure if I'm getting it right. I've tried it several times by disconnecting the battery, but get the same results over and over again.
- Close the window once (I hold the rocker switch in the up position until the window is fully closed)
- Press front half of rocker switch again to store the end position... (I lift the rocket switch again)
The glass will lower when the door handle is pulled, but will no raise again. When I leave my car, the driver's window is now partially lowered. Can somebody give me a hand. Thanks.....
|
Start by setting the "bottom" position first: Get in, close the door, turn the ignition on (car doesn't have to be running, but it won't hurt either). Then hold the button down until the window goes all the way down. Release and press it down one more time. Then, hold the button up until the window is all the way up, and then press it up one more time. That should do it.
The window controller stores settings for both all-the-way-up and all-the-way-down. You need to program both settings for the window to work correctly.
Good luck!