This active damping system offers continuous adjustment of individual damping forces based on current road conditions and driving style.

The driver can choose from two setup modes, ‘Normal’ and ‘Sport’, using a separate ‘damper’ button on the center console. ‘Normal’ mode is designed for general road driving and circuits with uneven tarmac. ‘Sport’ mode is intended for smoother track surfaces, where the harder settings help eliminate pitch and roll.

In either mode, PASM continuously evaluates the current conditions while automatically selecting the corresponding damper rates from the respective set of mapped values.

A range of sensors are used to monitor the movement of the body under acceleration, braking and cornering maneuvers, as well as on poor road surfaces. The PASM control unit then evaluates this data and modifies the damping force on each individual wheel in accordance with the selected mode. The result is a significant reduction in body movement as well as a better grip on the road.

For example: if ‘Sport’ mode is selected, the suspension is automatically set to a harder damper rating. If the quality of the track surface falls below a certain threshold, the system immediately changes to a softer rating within the ‘Sport’ setup range. When the quality of the tarmac improves once more, PASM automatically returns to the original, harder rating.

Need more information about PASM? Click this link: FAQ for PASM

This optional package is a valuable addition for trackday use. Available in conjunction with the CDR-24 CD radio, it includes a swivel-mounted analog and digital timer unit which is centrally located on the dashboard. All functions are easily accessible via the control stalk for the on-board computer. Analog dials measure hours, minutes and seconds, while a separate digital field displays whole seconds, tenths and one hundredths of a second. A second digital display runs in parallel in the instrument cluster. Click this Link to visit the FAQ entry for Sport Chrono.

The plenum is the piece that goes between the Cayman throttle body and the intake runners. The factory piece is a long black plastic tube with a divider down the middle. There are aftermarket replacements which are designed to allow the air to flow easier/faster into the engine and increase horsepower and torque.

SOFTRONIC produces DME programming and hardware to suit your companies specifications. Our current software suite is a complex matched set of programs housed in a Flash Manager and Flash Client. This software is matched with two cables, an End User and Master Cable. The SOFTRONIC proprietary flashing solution outperforms all other combinations in speed and accuracy including the factory Porsche equipment.

The Porsche Club of America - http://www.pca.org
CaymanClub.Net members who are also PCA members should request access to the PCA Member only forum by filling in their PCA Member ID# into their profile and then requesting a group membership addition, both of which can be done in the User Control Panel (User CP)