Your Donation Will Be Used To Pay For our ever increasing bandwidth costs, our hosting Service, domain registration, software licensing fees, maintenance costs and product evaluations Only!
Please enter your donation amount above, and then click on the donate button below.
I moved this from Rear Spoiler as it's more relevant in it's own thread.
This is a copy of the last post in the previous thread
Not the very best photograph, as you can't see much of the detail in black. never the less front splitter is now at the "ready to start moulding" so this is the finished shape.
At a rough guess if I manage to sell 10 they will cost about £250-275each ($500-$550 approx) in a Kevlar carbon mix which would need to be finished with a coat of paint, or maybe about double that in straight Carbon which obviously wouldn't need painting and would come Lacquered and ready to fit.
This is the spoiler (below) pre final finishing, this shot gives a better idea of the shape. Obviously the final spoiler will finish on the crease line where it joins the bumper (and not continue up to where the paint finishes, this is only to get the mould to realease as we start to make the master)
I'm quite happy to discuss what people want. Anybody interested please post in this thread with preference for a Carbon spoiler/splitters or a Composite Material which will require Painting.
Parties that have shown an interest (with no commitment) are:
boinkus44
msauer
AKA WANI
lawnmore
ExecDrew
Last edited by Tess Tickle; 01-27-2008 at 12:36 AM.
I think I would be interested in a paintable version. How would this attached, existing holes and some drilling? What kind of guarantee? What do you think the delivered price would be to California? Would like to see one installed on a car.
Don'tmiss scraping my master's windshield, winter oil, winter tires, chains, pluggin' in the car over night--block water heater! and interior warmer. And having to put anti-freeze in my GAS!
Domiss slippin' & slidin'. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. For the Ride of Your Life: Drive the Alcan! To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Thanks for the complement Joe, Would have been easier if somebody else had done something that I liked at reasonable money.!!
As far as fitting, at the moment it will use existing clips and rivets with maybe an extra one in each wheelarch, but we'll see as it comes together.
Unfortunately I’m flat out at work at the moment, so am sending it to a mould maker and he can only start on the mould 2nd week Feb. But promise to resurrect the thread as and when I have any news.
I would be interested also. I might think that a black CF finish would be really popular. If I could only get it unfinshed, I would send it to BumperPlugs to do the paint.
Bumper Plugs - Site Sponsor
At BumperPlugs.com, we strive for perfection. Our products offer the highest quality for your fine car. We are Porsche owners, and we are as particular as anyone.
Expect the best, and accept no substitute!
See why thousands of Porsche owners worldwide have installed our original Bumper Plugs™, Door Plugs™, Painted Bumperettes, Consoles and Trim for that "finished" appearance. But we don't just cater to Porsche. Our BumperPlugs™ and DoorPlugs™ fit almost any make and model in virtually any color.
These are the first and original Bumper Plugs™ and Door Plugs™ for Porsche cars. Get them for your vehicle today!
That really looks good! I've been looking into options for lip spoilers and the techart looks good, but the price damnit. To me the fear of chipping and cracking would prevent spending too much cash.
Is it possible to do a carbon fiber finish over fiberglass? I'm sure you are aware of the different color options available, such as silver, red, yellow weaved into the carbon. That would be schweet!
I moved this from Rear Spoiler as it's more relevant in it's own thread.
This is a copy of the last post in the previous thread
Not the very best photograph, as you can't see much of the detail in black. never the less front splitter is now at the "ready to start moulding" so this is the finished shape.
At a rough guess if I manage to sell 10 they will cost about £250-275each ($500-$550 approx) in a Kevlar carbon mix which would need to be finished with a coat of paint, or maybe about double that in straight Carbon which obviously wouldn't need painting and would come Lacquered and ready to fit.
This is the spoiler (below) pre final finishing, this shot gives a better idea of the shape. Obviously the final spoiler will finish on the crease line where it joins the bumper (and not continue up to where the paint finishes, this is only to get the mould to realease as we start to make the master)
I'm quite happy to discuss what people want. Anybody interested please post in this thread with preference for a Carbon spoiler/splitters or a Composite Material which will require Painting.
Parties that have shown an interest (with no commitment) are:
boinkus44
msauer
AKA WANI
lawnmore
Joe_Tule
ExecDrew
Tess, I notice at least one member up there who does not have a Cayman and has said that they will never buy one so act accordingly.
I would be interested also. I might think that a black CF finish would be really popular. If I could only get it unfinshed, I would send it to BumperPlugs to do the paint.
It's late here, but I thought you said that you wanted a Carbon Fibre one unfinished so BumperPlugs can paint it I would have thought that would be ideal for the composite one??
But of course you can have anything you wish.......you could be a customer one day
Bumper Plugs - Site Sponsor
At BumperPlugs.com, we strive for perfection. Our products offer the highest quality for your fine car. We are Porsche owners, and we are as particular as anyone.
Expect the best, and accept no substitute!
See why thousands of Porsche owners worldwide have installed our original Bumper Plugs™, Door Plugs™, Painted Bumperettes, Consoles and Trim for that "finished" appearance. But we don't just cater to Porsche. Our BumperPlugs™ and DoorPlugs™ fit almost any make and model in virtually any color.
These are the first and original Bumper Plugs™ and Door Plugs™ for Porsche cars. Get them for your vehicle today!
One of the best looking front splitters I've seen, and I like the target price(s). Not really sure which version I'd prefer yet - probably the composite, but I could work iwth either version.
Please keep us posted.
__________________
06 Cayman S - (almost) pure track car
07 Grand Cherokee SRT8
Until 
